CAM system Eccentric clamping system
The eccentric pull-down clamping system "CAM System" is particularly suitable for clamping large plate-shaped workpieces.
01
CAM system "T" & "S"
The "CAM" system offers you the following functions:
-
Clamping with max. 40 kN eccentric stroke.
-
Pull-down with max. 50 kN over the thread pitch.
-
Pendulum compensation through centric bearing.
The "CAM" system is compatible with all common ones T-slot machine tables and all grid systems.
02
Use of the CAM system
The "CAM" system is used either directly on the machine table or in special devices.
03
CAM system
This compact product enables double locking (axial and radial) according to the eccentric and screw principle. With a rotation of approx. 15 °, the workpiece is contacted with the entire clamping surface of the CAM. The CAM SYSTEM clamps the workpiece with a clamping force of 4,000 kg (t) and 2,000 kg (s). CAM SYSTEM is supplied with both cap screws and T-nuts that fit the respective T-slots of the machine tool. CAM SYSTEM “g” is delivered individually, giving the customer detailed grid specifications.
04
Complete set CAM system "T"
CAM SYSTEM “t” consisting of:
4 CAM SYSTEM “t”
4 fixed stops CAM SYSTEM “t”
8 pairs of T-nuts with screws
1 wrench for the CAM-SYSTEM
1 wooden box
05
Set Cam SYSTEM “s” consisting of:
4 CAM SYSTEM “s”
4 fixed ends CAM SYSTEM “s”
6 pairs of T-nuts with screws
1 wrench for the CAM SYSTEM
1 wooden box